User Tools
ycsserver:dr2x:dr2x_configuration
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Last revision Both sides next revision | ||
|
ycsserver:dr2x:dr2x_configuration [2021/03/02 00:04] dg9ffm [DG-ID configuration of the DR-2X] |
ycsserver:dr2x:dr2x_configuration [2022/05/12 12:24] dg9ffm [DG-ID configuration of the DR-2X] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ===== Recommended configuration of the DR-2X repeater ===== | ===== Recommended configuration of the DR-2X repeater ===== | ||
| - | After the basic configuration of the DR-2X repeater (uplink and downlink frequencies, | + | After the basic configuration of the DR-2X repeater (uplink and downlink frequencies, |
| \\ | \\ | ||
| \\ | \\ | ||
| Line 17: | Line 17: | ||
| * Use "Write to Device..." | * Use "Write to Device..." | ||
| - | * //The IMRS communicates with the LAN-01A via specified port 21110 (default). DO NOT CHANGE the “21110” UDP port setting. Also you should set the router firewall to open the UDP port “21110”.When using a router to connect the PC to the Internet, the UDP port must go through the router as well; however, communications using this port is generally prohibited on commercially available routers in the default setting.Therefore, | + | * //The IMRS communicates with the LAN-01A via specified port 21110 (default). DO NOT CHANGE the “21110” UDP port setting. Also you should set the router firewall to open the UDP port “21110”.When using a router to connect the PC to the Internet, the UDP port must go through the router as well; however, communications using this port is generally prohibited on commercially available routers in the default setting.Therefore, |
| * On “Destination Repeater' | * On “Destination Repeater' | ||
| Line 24: | Line 24: | ||
| * Enter the IP address of the desired YCS server | * Enter the IP address of the desired YCS server | ||
| + | * //for example: **185.228.139.209** = YCS262 (DE C4FM Germany)// | ||
| + | |||
| * Use "Write to Device..." | * Use "Write to Device..." | ||
| Line 29: | Line 31: | ||
| ==== DG-ID configuration of the DR-2X ==== | ==== DG-ID configuration of the DR-2X ==== | ||
| + | // => Please follow the instructions carefully so that correct operation is possible with the correct configuration.// | ||
| + | \\ | ||
| The next step is to configure the repeater' | The next step is to configure the repeater' | ||
| Line 62: | Line 66: | ||
| * Tap [EDIT] and and write **00** in the field | * Tap [EDIT] and and write **00** in the field | ||
| + | |||
| + | * Tap [BACK] twice to go back to DG-ID List screen | ||
| \\ | \\ | ||
| In the next step, the DG-IDs are configured which should be connected to the ycs server. It is possible to configure all DG-ID (02-99).\\ | In the next step, the DG-IDs are configured which should be connected to the ycs server. It is possible to configure all DG-ID (02-99).\\ | ||
ycsserver/dr2x/dr2x_configuration.txt · Last modified: 2022/05/29 08:19 by dg9ffm
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
